The FB4 IP TP base station enables the implementation of a high-performance DECT/IP communication network according to a wide variety of individual requirements and circumstances. All cordless telephony functions of the central IP telephony system are supported by the base station, while the DECT Controller makes configuring the DECT network a user-friendly and convenient process.
Integrated contacts enable the greatest possible range of technical installations to be connected to the FB4 IP TP. With its DECT messaging information, the FB4 IP TP can be used to relay specified events or conditions of each contact, such as temperature measurement devices, filling-level indicators, door contacts, motion sensors, etc.
Features
- Full 12 Channel FB4
- 10 channels for Speech (8 if DSS/IMS is installed)
- 1 Channel for Synchronization, 1 Channel as a Bearer
- Support Power over Ethernet (PoE) AND external Power Plug
- IEEE 802.3af PoE Class 1 (0.44 W to 3.84 W)
- Showing Status via LED
- Input Contact (open or closed)
- Two connectors for external Antennas
1/1
Specifications
- Dimensions: 203 x 155 x 27 mm approx.
- Temperature range: Operation: –10 ... +55 °C / Storage: –20 ... +60 °C
- Power supply: Power over Ethernet or separate 230 V plug-in power supply
- Contact interfaces: Contact connection for the relaying of local data, which can be switched via a contact, such as temperature reports, fill-level indications, door alarms, motion-detectors, etc.
- Ex-preparation: Prepared for Ex-Zone 1, Ex-Zone 2
- Network connection: Selectable — Ethernet TP
- Interface Standard IEEE 802.3u – 100 Base TX Fast Ethernet (twisted pair copper)
- IEEE 802.3 – 10BaseT Ethernet (twisted pair copper)
- Network cable RJ45-8p, UTP Cat. 5 E (100 m max.)
- EIA/TIA-568 – 100 Ohm STP (100 m max.)
- PoE (Power over Ethernet) IEEE 802.3af, Power Class 1, supplied via RJ45-8p pin (1, 2 and 3, 6)
- Phantom power on RX, TX, or supplied via RJ45-8p pin (4, 5 and 7, 8), supplied via unused wire pairs
- 0,44 ... 3,84 W, 36 ... 57 V